Who Are Roper?
Roper Fencing are manufacturers of TOP QUALITY turned soft wood post & rail fencing as well as turned logs, made to various dimensions.

Where is our Timber sourced?
All our timber comes from registered British SUSTAINED forestry plantations.

What is Roper Post & Rail Fencing?
Roper Fencing post and rail fencing features lathe-turned posts, domed at one end and pre-drilled for one, two, three or four horizontal rails. (Other rail combinations are available on request.) Cross rails are supplied uniformly turned to standard lengths. The rails fit in to pre-drilled sockets in the posits. NO EXTRA FASTENINGS ARE NEEDED

How is Roper Fencing installed?
The fencing posts are planted in holes approx. 300 mm dia. and 1800 mm apart. (If thinner posts are used, they are slightly closer together: see tech spec.) Generally the posts can be secured b tamping down the soil, but a light sand and cement mix is advised, especially for end posts. Cementing is recommended for either very sandy soils, end-posts or when a gate is to be hung from a post.

How Flexible is Roper Fencing?
Roper Fencing can be used in nearly all terrain in which a hole can be dug. The slightly oversized sockets compensate for any undulations in the ground. CURVES can be accommodated by the same device. Tighter radii can be achieved by using angle posts.

How is Roper Fencing treated?
All Roper Fencing products are pressure treated with preservative to stringent British Institute specifications to protect against rot and insect attack, and to ensure a long and rugged service life in all outdoor conditions.

Appearance?
Roper Fencing products are supplied in either green or brown preservative stained finish, but can easily be painted on site in many other colours using high performance microporous paints to prolong the lifetime of the installation.